Original Finnsonic Ultrasonic Transducers and Generators for cleaning of components
The efficiency of ultrasonic washing is based on high-frequency sound vibrations, which cause strong cavitation in liquid. Microscopic cavitation bubbles implode on the surface of the workpiece removing soils, grease and other contaminants fast and effectively.
Ultrasonic generator converts the net frequency into high frequency signal. A combination of FinnSonic generator and transducer offers the best performance in industrial ultrasonic cleaning of components.
Ultrasonic Generators
FinnSonic FSG-483 is a high power ultrasonic generator with adjustable wave characteristics and digital snap-in panel. This technically advanced easy-to-use generator suits well applications requiring consistent high power, like degreasing in surface treatment lines. It's multiple adjustable parameters help to optimize the ultrasonics into your specific application. It's unique Power Booster gives additional boost for tough cleaning applications .
Features
- 4,8 kW 30 kHz ultrasonic power in single unit
- Frequency Sweep
- Power Control
- Power Booster
- Degassing
- Auto tuning
- I/O interface
- Cabinet mounting
- Digital snap-in panel with
- Power, frequency, sweep and booster settings and controls
- Current and temperature monitoring
- Operating hour counter
- Malfunction protection and indications incl. low and high voltage, overload or short circuit, phase fault, generator overtemperature
FinnSonic FSG-121 is a reliable medium power ultrasonic generator with Power Booster and Frequency Sweep.
It's unique Power Booster gives additional boost for tough cleaning applications. FinnSonic FSG-121 is available in 30 kHz or 40 kHz frequency.
Features
- 1,2 kW nominal ultrasonic power
- Available in 30 kHz or 40 kHz frequency
- Cabinet mounting
- Power, Sweep and Booster controls with outer signals
- Protection and automatic reset against short circuit, overcurrent, low voltage and overtemperature.
Ultrasonic Immersible Transducers
Ultrasonic transducer converts the high frequency electric energy from the ultrasonic generator into mechanical vibration. A combination of FinnSonic generator and transducer offers the best performance in industrial ultrasonic cleaning of components. FinnSonic offers a full range of standard ultrasonic immersible transducers and a wide variety of mounting types.
All the transducers are available in 30 kHz and 40 kHz frequencies.
The piezoceramic transducer elements are bonded to hermetically sealed stainless steel AIS316L boxes. PZT elements are of sandwich construction. The transducers can be used in new cleaning installations or retrofitted into existing systems to enhance the cleaning effect. We are pleased to help you in optimizing an ultrasonic system for your particular needs.
Please do not hesitate to ask for our custom size transducers should none of the standard transducers below suit your specific application.
Technical Information:
|
Nominal |
No. of |
Nominal |
Length (mm)
|
Width (mm)
|
Depth (mm)
|
Type code |
|
300 |
6 |
30 |
260 |
200 |
90 |
FSB300/30-26x20… |
|
300 |
6 |
30 |
355 |
150 |
90 |
FSB300/30-35x15… |
|
600 |
12 |
30 |
310 |
300 |
90 |
FSB600/30-31x30… |
|
600 |
12 |
30 |
355 |
250 |
90 |
FSB600/30-35x25… |
|
600 |
12 |
30 |
450 |
200 |
90 |
FSB600/30-45x20… |
|
600 |
12 |
30 |
645 |
150 |
90 |
FSB600/30-64x15… |
|
1200 |
24 |
30 |
620 |
300 |
90 |
FSB1200/30-62x30… |
|
1200 |
24 |
30 |
710 |
250 |
90 |
FSB1200/30-71x25… |
|
1200 |
24 |
30 |
900 |
200 |
90 |
FSB1200/30-90x20… |
|
1200 |
24 |
30 |
1200 |
150 |
90 |
FSB1200/30-120x15… |
* All transducers available also as 40 kHz versions.
Other immersible box sizes on request.
2. Mounting types
Technical Information:
|
Type |
Description |
|
A |
Mounting to tank wall with threaded duct nipple and fastening bracket. Cable through the tank wall. |
|
B |
Mounting to tank wall with threaded duct nipple and fixing nipple. Cable through the tank wall. |
|
C |
Mounting to tank wall with hanging hooks. Rigid stainless steel tube for cable over the tank top. |
|
D |
Mounting to tank wall with hanging hooks. Flexible metal armoured 1 m hose for cable over the tank top. |
|
E |
Mounting to tank bottom. Rigid stainless steel tube for cable through the tank wall. |
|
F |
Mounting to tank bottom. Rigid stainless steel tube for cable over the tank top. |
|
G |
Mounting to tank bottom. Flexible metal armoured 0,5 m hose for cable through the tank wall. |
|
H |
Mounting to tank bottom. Flexible metal armoured 1,5 m hose for cable over the tank top. |
|
X |
Non-standard mounting |
The fixing system and cabling are on transducer short side in 
mounting types C - H. On request it can be also on the long side.
U/S Component Brochure
FinnSonic ultrasonics -
Boosted power for your parts cleaning
• US_Components_English.pdf